Smart sensors and access
Automatic irrigation and sensors in-house
For landscaping and garden construction
The control for the installation that the landscaper builds: watering by soil moisture per zone, only in the cool hours, from the cistern with dry-run protection and automatic refilling.
Alerts to your phone, manual mode and emergency stop in the interface.


- 5
- zones supplied from the cistern, plus drip irrigation at household water pressure
- 2
- watering windows per day, 04:00 and 19:00
How it works
- Measure
Soil moisture per zone and the cistern level are measured continuously.
- Decide
Watering happens only where it is too dry, in the cool hours and with a fixed maximum duration per zone.
- Water
Pump and valves switch on by themselves and switch off again as soon as the soil is moist enough.
- Refill
The cistern refills by itself before it runs empty.
- Report
Faults, dead sensors and unusual levels arrive as a message on your phone. Every operation is recorded in the logbook with its reason and duration.
Four layers of protection, permanently built in
- No midday heat. Watering happens only in the two windows in the early morning and in the evening, otherwise the water evaporates.
- Dry-run protection. If the level is too low, the pump does not run. An empty cistern or a stuck valve gets noticed.
- Dead sensors. If a sensor fails, there is no blind watering.
- Double safety net. Pump and inflow are monitored continuously: If the pump runs without an open valve, it is shut off and reported.
Contact
Get in touch with us
Write to us about what you need.
A few sentences are enough.
We will get back to you personally.
We are based between the Rhine-Main area and the Middle Rhine.
Anywhere in Germany we are happy to talk by video call or phone, and where a project calls for it, we come by in person.
